Open    Access



Laboratory and Field Investigations of Polymer and Crumb Rubber Modified Bitumen



Author(s)

Jan B. Król1, Piotr Radziszewski1, Karol J. Kowalski1, Michał Sarnowski1 and Paweł Czajkowski2

Full-Text PDF XML     335 Views

DOI:10.17265/1934-7359/2014.10.014

1. Faculty of Civil Engineering, Warsaw University of Technology, Warsaw 00-637, Poland
2. Development and Technology Office, LOTOS Asfalt Sp. z o.o., Gdańsk 80-718, Poland

In this paper, properties of new kind of modified bitumen are presented. Bituminous binder was modified with mix modification using polymer and additive of crumb rubber. Terminal blend process at the refinery was applied to produce the mixed modified binder. Laboratory tests were focused on the characterization of the properties of 45/80-55 CR binder with comparison to reference 50/70 and conventional polymer modified 45/80-55 bitumen. Based on conventional binder tests such as penetration, softening point and Fraass breaking point as well as BBR (bending beam rheometer) and DSR (dynamic shear rheometer) tests, rheological properties were investigated. For determination of stability of the polymer and crumb rubber, modified bitumen tube testing method was used. Based on the results analysis, improvement of the viscoelastic properties of polymer and crumb rubber modified bitumen was observed. Conventional properties and stability tests showed that it is possible to pass standard requirements for polymer modified bitumen. Mixed modification and terminal blend allow to use crumb rubber as a modifier with elimination of the separation of crumb rubber during transportation and storage at high temperature. In this paper, experience from filed sections with use of the asphalt mixture with new kind of modified bitumen is presented.

Polymer modified bitumen, crumb rubber, terminal blend.