Open    Access



New, Simple Blade-Pitch Control Mechanism for Small-Size, Horizontal-Axis Wind Turbines




Author(s)

Ahmed Farouk Abdel Gawad

Full-Text PDF XML     548 Views

DOI:10.17265/1934-8975/2013.12.004

In the present research work, the pitch-control is carried out such that the rotor blades are rotated around their longitudinal axis while the rotor continues its normal rotation. It is really a challenge to produce a clever design to pitch the rotor blades by the optimal amount so as to maximize the power output at all wind speeds. The mechanism is implemented to a three-blade, horizontal-axis, home-scale wind turbine. The mechanism is powered by a suitable DC (direct-current) motor. The tests were carried out in the open section of a delivery wind tunnel. The air speed was measured by a suitable anemometer. The corresponding rotational speed (rpm) and output voltage at different wind speeds were measured and recorded for calibration of the control system. The mechanism proved to be successful in controlling the pitch angle over a wide range of wind speeds.

Blade-pitch control, wind turbine, home-scale, control mechanism, microcontroller