Open    Access



Comparisson of Recrystallization Kinetics and Grain Growth in Polycrystalline Shape Memory Alloys




Author(s)

Marcelo Nava, Emmanuel Pacheco Rocha Lima and Pedro Cunha de Lima

Full-Text PDF XML     1000 Views

DOI:10.17265/2161-6213/2020.3-4.005

DETEC, Instituto Federal de Educação, Ciência e Tecnologia da Bahia, Barreiras 47808-006, Brasil

The non-ferrous SMAs (shape memory alloys) have, normally, two problems that hinder the use in industrial scale: the natural aging and grain growth. The first degrades the memory effect, while the second, observed during the alloy’s mechanical processing, modifies the phase transformation temperatures. Thus, the study of recrystallization kinetics is important for enabling the control of hardened state as a function of treatment time without allowing the exaggerated grain growth. The objective of this study is to determine the recrystallization kinetics in different SMAs (Cu-14Al-4Ni, Cu-12Al-0.5Be and Ni-42Ti), based on an empirical law of J-M-A (Johnson-Mehl-Avrami), as well as their activation energies for grain growth process according to the empirical Arrhenius law.Quantitative evaluations of the grain growth kinetics over a wide range of indicated DSC (differential scanning calorimetry) temperatures have been performed. The results show that the alloy less susceptible to aging in temperatures below the recrystallization peak is the Ni-42Ti, because it presented the highest activation energy, followed by the Cu-14Al-4Ni. The equations that describe the recrystallization kinetics follow the empirical law of J-M-A. The recrystallization kinetics accompanied by hardness variation was an important tool, working as an advisor for selection of treatment time as a function of temperature.

SMAs, NiTi, CuAlNi, CuAlBe, recrystallization kinetics, grain growth.